+ Free Fitting of parts, see below. The spa must be full of water upon our arrival and normally takes between 3-4 hours to complete, spa size dependent.

• A chemical 'wash out' of the pumps and pipes using a product made by the leading manufacturer "Spa Flush" which removes "Bio Film"
• Commercial pump out of the dirty water.
• The filters, jets and spa pillows removed. All to be cleaned and inspected before re-fitting.
• Complete spa shell chemical clean and heavy rinse.
• Wet vacuum of residual water from all areas of the spa surface and jets holes.
• All neccessary access panels are removed. This allows a full inspection of the heater, pump(s), their unions, bearing/seals, all of the electrical connections to the spa and any tell-tale signs of current or future wear.
• The spa cover is cleaned, rinsed, dried and coated with a barrier spray, "303 Protectant"
• All of the jets and pillows are installed.
• The spa is then re-filled with fresh water.
• Finally the spa is turned back on and the operation of the pumps and heater checked.
• Any further particles which are ejected into the water when the spa is re-started - perfectly normal - are skimmed and hoovered out leaving you with a perfectly checked out, spotless spa. Guaranteed to be as clean as when it was first installed !
• If required, for a small further charge, we can offer a wood care service whilst carrying out a Full Service. Please view the separate page on this application.

*We do not provide a huge checklist to justify a service cost. Our Hot Tub services are through the eyes and ears of a professional spa service engineer who has looked inside hundreds of hot tub's and has the depth of knowledge to know when something is not right.

*FREE FITTING OF PARTS DURING A FULL SERVICE :

During a Full Service it's a great opportunity to have the following parts replaced/installed, free of charge. We will be in your garden for approximately 4 hours, make use of us!

COVER LIFTING MECHANISM - We are proud to be associated with a leading UK spa accessory company, SplashSpas. This enables us to supply the very best range of coverlifters AND at "internet prices in your garden". With our experience we can advise, on the day, which mechanism will work best, taking into account the size and location of your spa. Every spa should have a coverlifter. Allowing the 'one person removal and storage' of even the largest lids, you'll wonder how you survived without one. Some of the best Coverlifters require brackets to be placed underneath the hot tub for support. During a Full Service your spa will be emptied so what better time to have one installed!

OZONATOR - Did you know that your ozonator - if fitted - has a life expectancy? If already equipped, your Hot Tub will probably contain either a DEL and Balboa ozonator. - If you spa ozonator has come to the end of it's life - you can purchase a replacement and have it fitted free of charge, on the day. - If your spa is 'ozone ready' our service technician can install a new ozonator, again free of charge on the day. What does an Ozonator do?